The CFP module is a hot pluggable form factor designed for optical networking applications. CFP is usually acronym from 100G (C = 100 in Roman numerals; Centum) Form factor Pluggable. As name suggests, CFP is introduced to serve as optical transceiver for 100G interfaces. There are several CFP types introduced - CFP, CFP2 and CFP4, but let’s begin with general CFP architecture. General CFP architecture of CFP divides in two parts - Electrical interface interacting with equipment line card interface and optical line interface

From equipment line card electrical interface aspect CFP has several “M-Lines” with are working 10Gbps speed and separate management interface used for clock & signaling data. If CFP is definitely working 100GBase-LR4 mode, then it has 10 x 10Gbps M-Lines, if 40GBase-LR4 mode, then 4 x 10Gbps M-Lines. So called “Gear Box” is electrical 10:4 Mux/DeMux module aggregating up to 10 M-Line interfaces in maximum 4 N-Line interfaces. In case of 100GBase-LR4 each N-Line speed can be 25Gbps and in case of 40GBase-LR4 N-Line speed is 10Gbps. Each N- Line is converted to optical signal with different wavelength and all four wavelengths are transmitted to CFP line interface using built in passive optical multiplexers

CFP form factor is oldest from CFP family and it has current MSA (Multi Source Agreement) Rev 1.4. It can support both - 100GBase-X and 40GBase-X, and it’s general principle is certainly following

CFP electrical interface for 100G transmission is called CAUI - C (it again represents Roman Centum for 100G) Attachment Unit Interface. CAUI interface was standardized by IEEE802.3ba - Annex 83A, defining that CAUI interface is a parallel electrical interface with each lane running at a nominal rate of 10.3125 Gbps

The 802.3bm standard was approved. The 802.3bm standard specifies four-lane chip-to-module and chip-to-chip electrical specification (CAUI-4). In new version of CAUI-4 interface are 4 M-Lines, each running speeds 25.78 Gbps for 100G Ethernet and 27.95 Gbps for SONET/SDH OTU4.Know more:www.oemfibers.com